fb Skip to main content

Invision Property

An easement is a legal right for someone other than the owner to use part of a property for a defined purpose, such as running a sewer pipe, crossing the land to reach a road or carrying power lines. Easements usually stay with the land when it is sold, so you inherit them at settlement. Most are harmless. A few can stop you building the pool, extension or granny flat you had planned, which is why you should check every easement before you exchange contracts, not after.

This guide explains how easements work, which types you are most likely to meet, how to find them (including the ones that do not appear on the title), and how to judge whether a particular easement is acceptable. The legal detail differs between states, so we flag where a rule belongs to one jurisdiction and where it applies more widely.

Invision Property
Check Easements Before You Buy
Invision Property helps buyers assess Brisbane purchases, including due diligence and negotiation, so easements can be considered before committing.

Explore buyer support

TL;DR

  • An easement gives another party a limited right to use your land. It does not transfer ownership, and it generally passes to the next owner automatically.
  • The common types are utility easements (sewer, water, electricity, stormwater), rights of carriageway (shared access) and drainage easements.
  • A title search alone may not reveal everything. Combine it with the registered plan, a council property search and a site inspection.
  • The real risk is what the easement prevents: building, planting or landscaping over it. Check it against your plans, not just your contract.
  • Get a conveyancer or property lawyer to review the contract and any easement terms before you sign.

Table of Contents

What an easement actually is

In plain terms, an easement lets a person or organisation use a specific part of someone else’s land for a limited purpose, without owning it. Land Services SA describes the arrangement as a right for the holder (the grantee) to use land for a specific purpose, and notes that it can restrict how the landowner (the grantor) uses that land. Although that page comes from South Australia, the basic concept is the same across Australian states and territories.

Two terms come up constantly in contracts:

  • Burdened land (servient tenement): the property carrying the easement. If you buy it, this is your block.
  • Benefiting land (dominant tenement): the neighbouring parcel that gains the right, for example a rear lot that needs a driveway across your land.

An easement does not give the holder exclusive possession. You keep the right to use your land, provided you do not interfere with the holder’s rights. That balance is the heart of most disputes.

Appurtenant easements and easements in gross

Legally, easements fall into two groups. An appurtenant easement benefits a specific neighbouring parcel and attaches to both pieces of land. An easement in gross benefits a named entity rather than a parcel, which is the usual arrangement for councils and utility providers. The Queensland Department of Resources easement policy explains that in Queensland, public utility easements such as electricity and water do not require a benefited parcel of land.

Two easement types and who benefits

For a buyer, the distinction matters in practice. A shared driveway (appurtenant) involves a neighbour you will deal with personally. A sewer easement in gross involves a utility with statutory powers, and you will deal with it through approvals.

The easements you are most likely to meet

Type What it allows Typical effect on you
Sewerage or water easement Pipes running through your block, often along a boundary or across the rear Limits building over or near the pipe; approval may be needed
Stormwater or drainage easement Water to be carried across your land Keeps the corridor clear; affects fencing and landscaping
Electricity or telecommunications easement Lines or underground cables Restrictions on structures, trees and digging
Right of carriageway A neighbour or a rear lot uses part of your land to reach a road Shared or burdened driveway; maintenance and access issues
Party wall or shared services Rights over shared walls or services in attached dwellings Obligations to maintain and not damage the shared element

Land Services SA lists pathways, walkways and similar shared-use rights alongside utility and access easements as common examples, so the pattern holds well beyond one state.

Why a title search is not enough

Most buyers assume the Certificate of Title will list every burden on the land. Often it does for registered easements, but not always for those held by utilities. Noosa Shire Council’s property search page shows how a Standard Property Search covers planning scheme details, building envelopes and development requirements that sit outside the land registry. Redland City Council notes that its property searches include details of easements and covenants, among other items, and refers readers to the Queensland titles registry for dedicated easement searches.

The practical lesson is to layer your checks:

  1. Title search. Look for entries labelled easement or easement in gross, and check older titles where easements may sit under other headings. A guide from Title Finder recommends scanning both the interests and encumbrances sections.
  2. Registered survey plan. Match each easement reference on the title to its exact position on the lot. A 2.0 metre easement along the side boundary is a very different proposition from one cutting diagonally through the middle of the block.
  3. Council property search. This can reveal pipe locations and local planning constraints. Fees and turnaround vary by council, so ask early rather than a day before your cooling-off period ends.
  4. Physical inspection. Walk the boundary. Look for maintenance covers, pits, power poles, pipes surfacing and signs that a neighbour is already using part of your land.
  5. Body corporate records. If the property is in a community title scheme or strata, request the records and the management statement, because easements and shared access rights can be recorded there.

If an easement appears on a survey but not in the title documents, do not wave it away. Ask your conveyancer to trace its origin before settlement.

What an easement can stop you doing

The access right itself rarely troubles a buyer. The conditions attached to it do. The Queensland policy document sets out that the owner keeps the use of the land only so far as it does not interfere with the easement holder’s rights, and that holders with statutory authority can access their assets for maintenance.

In practice that means:

  • Building. Houses, extensions, decks, carports and pools are the usual casualties. In Queensland, Urban Utilities’ build over asset referral guidelines explain that works which do not meet the acceptable solutions in the Queensland Development Code’s building over or near relevant infrastructure provisions can trigger a referral to the utility.
  • Landscaping. Deep-rooted trees, retaining walls and hardscaping over a pipe or cable corridor may need to be removed if the holder has to dig, and you should not assume the holder will compensate you for them.
  • Fencing and access. The holder may need a clear path. Gates, locked fences and parked vehicles can become points of conflict, particularly with a right of carriageway.
  • Future development. Subdividing, adding a second dwelling or knocking down and rebuilding all depend on where the easement sits. A narrow block with a wide easement may have much less usable land than its title area suggests.

That last point matters most for investors, because an easement that blocks future development can limit both rental yield and capital growth. It does not make the property a bad purchase automatically. Plenty of sound homes carry sewer easements along a back fence that never affect daily life. The question is always whether the easement conflicts with what you intend to do.

A worked example

Suppose you are considering a 600 square metre block in an established suburb and plan to add a rear granny flat. The title shows a 3 metre sewer easement across the back. You would:

  1. Locate the easement on the registered plan and measure it against where the granny flat would sit.
  2. Ask the council or utility whether building near or over that pipe is allowed, and on what conditions.
  3. Get a builder’s view on whether a redesigned footprint, deeper footings or a different location would comply.
  4. Decide, before exchange, whether the price reflects the constraint.

If the answer to step 2 is no, you have learned that before committing. If you find out afterwards, the cost falls on you.

Two administrative points catch buyers out, especially in Queensland.

First, creating or releasing an easement can itself be taxable. The Queensland Revenue Office states that transfer duty applies when you sell, buy or transfer property, including rights to land, and treats such transfers as dutiable transactions. If your plan involves negotiating a new easement with a neighbour, for example to share a driveway, get advice on duty before you agree to anything.

Second, other interest holders may need to consent. In New South Wales, for example, the Registrar General’s guidance on written consent for electronic dealings refers to the consent of lessees, mortgagees and chargees in connection with easement dealings. Lenders and other registered interest holders can slow a transaction if they are approached late. Raise any proposed easement change with your conveyancer at the start, not in the final fortnight.

How to judge whether an easement is acceptable

Use these criteria to decide whether to proceed, negotiate or walk away.

  • Location. Boundary easements are usually benign. Easements through the building area are not.
  • Width and type. Wider corridors and major assets (trunk sewers, high-voltage lines) carry heavier restrictions than a small residential connection.
  • Holder. A utility or council operates under statutory frameworks. A neighbour relies on the written terms, so read them closely.
  • Existing structures. If the house, shed or pool already sits over an easement, ask whether approval was ever granted. Unapproved works can become your problem.
  • Your plans. Match the easement against renovation, extension or subdivision ideas, and obtain a builder’s feedback.
  • Price. If the constraint reduces what you can do with the land, it should show up in your negotiation.

If you do find a concern, ask a conveyancer or property lawyer to review the contract. They can request the easement terms, raise requisitions with the seller’s representative and advise on whether to make your offer conditional. Our own notes on legal considerations in property buying and our due diligence checklist show where easement checks fit in the wider process.

Our perspective: treat easements as a pricing and planning question

We see easements as information, not as a verdict. When we assess a property for a buyer, we want to know three things: what the easement is, where it sits against the usable land, and whether it constrains the strategy the buyer has in mind. A buyer holding a property for rental yield may be perfectly comfortable with a sewer line along the fence. A buyer planning a granny flat or a knock-down rebuild may not be.

Easement strip beside potential building area

Because we act only for the buyer and charge a fixed fee rather than a percentage of the price, we have no reason to talk anyone into a property or to push a price up. That matters here, because an easement is often a legitimate lever in negotiation: if it limits the land’s potential, the price should reflect that. Our approach pairs market data with hands-on due diligence, so we look at the plan, the council information and the contract before we recommend a buyer proceeds.

Interstate and overseas clients have the most to gain from this discipline. If you cannot walk the boundary yourself, you need someone who will, and who will report what they find without sugar-coating it. Our guides on buying sight unseen in Australia and working with a buyer’s agent remotely explain how that works in practice.

— Nathan Prasad

Easements and flood or planning overlays

An easement is one layer of constraint on a block. Flood mapping, planning overlays and building envelopes sit alongside it, and together they determine what you can build. In Brisbane, for instance, our guide to checking flood risk before you buy covers another set of checks that should happen in the same window as your easement review. Looking at them together prevents the situation where a block passes one test and fails another you did not run.

Where we can help

If you are buying in Brisbane, the Gold Coast or Melbourne, or anywhere in Australia where the data points, we handle the search, shortlist, due diligence and negotiation for you, and every engagement starts with a free strategy session. Easement and title checks are part of that due diligence. You can learn more about our investment property buyers agent service in Brisbane or our home buyers agent service in Brisbane, or get in touch through our main site to book your session.

FAQs

Can I buy a property with an easement?

Yes. Many properties carry easements, and most have little effect on everyday use. What matters is the type, the location and the conditions. Compare the easement with your plans for the land and have a conveyancer review the contract before you sign.

Does a title search show all easements?

Not necessarily. A title search shows registered interests, but utility infrastructure and planning constraints can also appear in council property searches and on the registered survey plan. Councils such as Noosa offer searches that go beyond land registry data, so combine the title, the plan, a council search and an inspection.

Can I build over an easement?

Sometimes, but only with the holder’s agreement or approval, and often not at all. For sewer assets in Queensland, building work that does not meet the acceptable solutions in the Queensland Development Code can require a referral to the utility, as set out in Urban Utilities’ guidelines. Speak to your builder, certifier and the relevant utility before you commit to a design.

Does an easement lower a property’s value?

It can, if it limits the usable or developable area, but it does not always. A narrow easement along a rear boundary may have no effect, while one through the middle of a block may reduce its potential. Ask a local valuer or buyers agent how comparable properties with and without easements have sold.

Can an easement be removed?

Only through a formal process, usually requiring the agreement of the holder and registration of a release. In Queensland, creating or releasing an easement may attract transfer duty, so seek legal advice on the costs and steps before you rely on removal as part of your plan.

Sources

BOOK A FREE CALL TO LEARN MORE

Get Instant Access

Get Instant Access